Blog
Maytag Refrigerator Water Filter | Which One You Need & Where to Buy

Maytag refrigerator water filter replacement depends on your fridge type. French door and bottom freezer Maytag models use Filter 2 (EDR2RXD1). Side by side and top freezer models use Filter 1 or Filter 3. All Maytag refrigerators use the genuine EveryDrop filter system. The same filters are used in Whirlpool and KitchenAid fridges. Replace every 6 months or 200 gallons.
Own a Maytag refrigerator and not sure which water filter it takes? You are not alone. Maytag is owned by Whirlpool Corporation and uses the same EveryDrop filter system but which specific filter depends on your fridge model. This guide tells you exactly which Maytag refrigerator water filter you need, where it is located, how to replace it, and where to get the best price.
Which Water Filter Does Your Maytag Refrigerator Need?

Check the label on the filter inside your Maytag fridge it will say Filter 1, 2, or 3. French door and bottom freezer models almost always use Filter 2 (EDR2RXD1). Side by side models use Filter 1 or Filter 3.
Every Maytag refrigerator with a water dispenser or ice maker has a built-in water filter. The filter type depends on your fridge model and housing location. Here is a quick guide:
| Maytag Fridge Type | Filter Number | Part Number | Filter Location |
| French door refrigerator | Filter 2 | EDR2RXD1 | Interior upper housing |
| Side by side refrigerator | Filter 1 or Filter 3 | EDR1RXD1 / EDR3RXD1 | Upper interior or base grille |
| Bottom freezer refrigerator | Filter 2 | EDR2RXD1 | Interior upper housing |
| Top freezer refrigerator | Filter 3 | EDR3RXD1 | Base grille |
Pull out the filter currently in your fridge and check the label. If it says Filter 1, 2, or 3 that is your replacement number.
Maytag Refrigerator Water Filter Compatibility by Model
Most Maytag French door refrigerator models use EDR2RXD1. Most Maytag side by side refrigerator models use EDR3RXD1. Check your model number against the table below to confirm.
Here are the most common Maytag refrigerator model series and their matching filters:
| Model Series | Fridge Type | Filter | Part Number |
| MFI2570FEZ | French door | Filter 2 | EDR2RXD1 |
| MFT2772HEZ | French door | Filter 2 | EDR2RXD1 |
| MSS25C4MGZ | Side by side | Filter 3 | EDR3RXD1 |
| MSF25D4MDM | Side by side | Filter 3 | EDR3RXD1 |
| MBF1958FEZ | Bottom freezer | Filter 2 | EDR2RXD1 |
How to find your Maytag model number
- Open the fridge door, Model sticker is on the inner left wall or door frame
- Check your owner’s manual, Model number is on the first page
- Look at the original purchase receipt
If your Maytag model number starts with MFI or MFT you need Filter 2 (EDR2RXD1). If it starts with MSS or MSF you need Filter 3 (EDR3RXD1).
Is the Maytag Refrigerator Water Filter the Same as Whirlpool?
Yes, Maytag and Whirlpool use the same EveryDrop filter system. An EDR2RXD1 bought for a Whirlpool fridge will work in a compatible Maytag fridge and vice versa. Both brands are owned by Whirlpool Corporation.
This is one of the most common questions about the Maytag refrigerator water filter and the answer is yes. Here is a direct comparison:
| Feature | Maytag Refrigerator | Whirlpool Refrigerator |
| Parent company | Whirlpool Corporation | Whirlpool Corporation |
| Filter system | EveryDrop | EveryDrop |
| Filter types used | Filter 1, 2, 3 | Filter 1, 2, 3, 4, 5 |
| Filters interchangeable? | Yes — same EveryDrop system | Yes — same EveryDrop system |
| Filter replacement schedule | 6 months / 200 gallons | 6 months / 200 gallons |
Maytag vs Whirlpool filter
Both use identical EveryDrop filters. The only difference is the fridge brand name on the door. If you find a Whirlpool EDR2RXD1 on sale it will work perfectly in your Maytag fridge, and vice versa.
How to Replace the Maytag Refrigerator Water Filter
Replacing the Maytag refrigerator filter takes under 3 minutes with no tools. The process depends on where your filter is located.
Interior Upper Housing (French Door and Bottom Freezer)
- Locate the filter: Open the fridge, filter is in the upper interior area behind a push-button panel.
- Press eject: Press the eject button or twist counterclockwise to release.
- Remove old filter: Pull straight out. Keep a cloth nearby for drips.
- Insert new filter: Remove cap, align arrow, push in firmly and twist clockwise until it clicks.
- Reset indicator: Hold filter reset button 3 seconds until light turns green.
- Flush system: Run 2-3 gallons through the dispenser and discard before drinking.

Base Grille Housing (side by side and top freezer)
- Find the grille: Look at the bottom front of the fridge, filter slot is on the left side.
- Eject the filter: Press the eject button or twist a quarter turn counterclockwise.
- Pull out: Pull straight out, have a cloth ready, grille filters drip more.
- Insert new filter: Remove cap, push in firmly, twist clockwise until locked.
- Reset and flush: Hold reset button 3 seconds, then run 2-3 gallons through the dispenser.
- Always flush 2-3 gallons after installing a new Maytag water filter. This clears air and loose carbon from the new cartridge.

How Often Should You Replace Your Maytag Refrigerator Filter?
Replace your Maytag refrigerator water filter every 6 months or 200 gallons, whichever comes first.
Replace sooner if you notice:
- Water or ice tastes or smells off
- Water flow from dispenser is noticeably slower
- Filter indicator light is orange or red
- More than 5 months with heavy household use
Lifespan by Household Size
- 1-2 people, Full 6 months comfortably
- 3-4 people, Replace at 4-5 months
- 5+ people, Replace every 3-4 months
Is an OEM Maytag Water Filter Worth It Over a Generic?
Genuine EveryDrop OEM filters protect your Maytag warranty and reduce 24 certified contaminants. Generic filters cost less but cover fewer contaminants and may void your warranty.
When shopping for a Maytag refrigerator water filter replacement. You will see OEM and generic options. Here is an honest comparison:
| Feature | EveryDrop OEM | Generic Compatible |
| NSF certified contaminants | 24 | Typically 2-7 |
| Maytag warranty safe | Yes | May void warranty |
| Guaranteed fit | Yes | Varies |
| Price | $45-$55 | $15-$30 |
The genuine EveryDrop OEM filter is the right call for Maytag owners, especially if your fridge is under warranty. It guarantees fit, protects your warranty, and delivers full 24-contaminant NSF protection. A generic saves money but cuts corners on protection.
Frequently Asked Questions
Which water filter does my Maytag refrigerator use?
French door and bottom freezer models use Filter 2 (EDR2RXD1). Side by side and top freezer models use Filter 1 or Filter 3.Check the label on your current filter to confirm.
Is the Maytag refrigerator water filter the same as Whirlpool?
Yes, Both brands use the identical EveryDrop filter system since Maytag is owned by Whirlpool Corporation.
How often should I replace my Maytag refrigerator water filter?
Every 6 months or 200 gallons, whichever comes first.
Where is the water filter on a Maytag refrigerator?
Either in the upper interior housing (French door models) or in the base grille at the bottom front (side by side models).
How do I reset the filter light on my Maytag refrigerator?
Hold the filter reset button for 3 seconds until the indicator turns green or blue.
Can I use a Whirlpool filter in my Maytag refrigerator?
Yes, Maytag and Whirlpool use the same EveryDrop filters, they are fully interchangeable.
Do I need to flush the filter after installing it?
Yes, Run 2-3 gallons through the dispenser and discard before drinking.
