EveryDrop Filter 2 (EDR2RXD1) | Compatible Fridges, What It Removes & Where to Buy

The EveryDrop Filter 2 (EDR2RXD1) is a genuine Whirlpool ice and water refrigerator filter that directly replaces the older W10413645A. It fits select KitchenAid, Whirlpool, Maytag, Amana, and Jenn-Air French door and bottom freezer refrigerators with an interior upper filter housing.

NSF certified to reduce 24 contaminants including lead, chlorine, cysts, and pharmaceuticals. Replace every 6 months or 200 gallons.

If your fridge filter light is red and you are seeing Filter 2 or W10413645A on the label you are in the right place. The EDR2RXD1 is one of the most common filters for KitchenAid and Whirlpool French door refrigerators.

This guide tells you exactly what it fits, what it removes, how to install it in minutes, and whether paying for the genuine EveryDrop version is actually worth it over a cheaper alternative.

Is the EDR2RXD1 the Right Filter for Your Fridge?

The EDR2RXD1 is the right filter if your fridge label says Filter 2 or W10413645A, or if you own a KitchenAid, Whirlpool, Maytag, Amana, or Jenn-Air French door or bottom freezer refrigerator with an interior upper filter housing.

Still not sure? Use this quick check:

Pull out the filter currently in your fridge and check the label. If it says Filter 2, W10413645A, or EDR2RXD1  this is your replacement.

What Is the EveryDrop Water Filter 2?

The everydrop water filter 2 part number EDR2RXD1 is the OEM ice and water refrigerator filter made by Whirlpool Corporation under its EveryDrop brand. It replaced the older W10413645A and brought NSF-certified contaminant reduction from 7 up to 24 contaminants.

It uses activated carbon block technology  water is forced through a compressed carbon matrix that traps contaminants through adsorption, without removing the beneficial minerals your body needs.

What does it filter out?

The edr2rxd1 water filter is NSF 42, 53, and 401 certified. Here is what it removes:

The EDR2RXD1 is specifically designed as an ice & water filter meaning it cleans water going to both your dispenser and your ice maker through the same cartridge.

Which Refrigerators Are Compatible With the EDR2RXD1?

The edr2rxd1 is not universal. It fits French door and bottom freezer refrigerators with an interior upper filter housing. Here are the main compatible brands and model examples:

Cross-reference part numbers

If your current filter has any of these part numbers, the EDR2RXD1 is your replacement:

KitchenAid Refrigerator Water Filter  EDR2RXD1 Explained

KitchenAid refrigerator water filter searches overwhelmingly lead to the EDR2RXD1. That is because KitchenAid  owned by Whirlpool Corporation  uses this filter across most of its French door fridge lineup. If you own a KitchenAid fridge with an interior filter, there is a very high chance this is your filter.

KitchenAid sells this same filter under the part numbers P9WB2L and P9RFWB2L  but they are identical to the EDR2RXD1 in performance and fit. Buying the EveryDrop EDR2RXD1 is the same thing, often at a better price.

If your KitchenAid model number starts with KRM, KRF, or KRB you almost certainly need the EDR2RXD1. Confirm by checking the filter label inside your fridge.

EDR2RXD1 vs EDR1RXD1 — What Is the Difference?

This is the most common source of confusion. People often order the wrong filter because Filter 1 and Filter 2 look similar. Here is the key difference:

EDR1RXD1 and EDR2RXD1 are NOT interchangeable. They fit different filter housings. Always check your current filter label before ordering. If it says Filter 1  you need EDR1RXD1. If it says Filter 2  you need EDR2RXD1.

How to Replace the EveryDrop Filter 2 — Step by Step

Replacing the everydrop filter 2 takes under 3 minutes. No tools needed.

Step 1 — Find the filter: Open the fridge the EDR2RXD1 housing is in the upper interior area, usually top-right behind a small panel or cover.

Step 2 — Open the housing: Press the eject button or open the cover door. The old filter will slide out slightly.

Step 3 — Remove the old filter: Pull straight out. Keep a cloth handy a few drops of water may drip from the housing.

Step 4 — Unwrap and insert the new EDR2RXD1: Remove the protective cap, align the filter with the arrow pointing up or in the direction marked on the housing, push in firmly and twist clockwise until you feel it click.

Step 5 — Reset the filter light: Hold the filter reset button on the control panel for 3 seconds. The indicator should turn from red to green or blue.

Step 6 — Flush the system: Run 2-3 gallons of water through the dispenser and discard. This clears air and loose carbon from the new cartridge.

Never skip the flush step. Black specks in water after a new filter install are loose carbon particles completely harmless but easy to avoid by flushing properly.

How Often Should You Replace the EDR2RXD1?

The standard recommendation is every 6 months or 200 gallons but the right answer depends on your household.

Signs your filter needs replacing now

Do not wait for the light to turn red. Replace sooner if you notice:

• Water from the dispenser tastes or smells off
• Water flow is noticeably slower than usual
• Ice has an unusual taste or odor
• Filter indicator is orange or red
• It has been more than 5 months and your household uses the dispenser heavily

Lifespan by household size

Here is a practical guide based on average daily usage:

• 1-2 people — filter lasts the full 6 months comfortably
• 3-4 people — replace closer to 4-5 months
• 5+ people or heavy ice usage — replace every 3-4 months

An overdue filter does not just stop working.It can start releasing trapped contaminants back into your water. Do not skip replacements.

How Much Does the EDR2RXD1 Cost And Is It Worth It?

Here is a clear breakdown of your options and what each one actually gets you:

Buying a 3-pack is the best value if you plan to stay in your home long-term. It works out cheaper per filter and means you always have a replacement ready when the light turns red.

Genuine EveryDrop EDR2RXD1 vs Generic Alternatives  Honest Comparison

You will find plenty of edr2rxd1 alternative options online some from reputable brands like Waterdrop, others from unknown sellers. Here is an honest side-by-side so you can decide:

If you want basic chlorine and odor reduction on a budget, a Waterdrop or similar NSF 42/53-certified compatible filter will do the job. But if you have children, elderly family members, or anyone with health sensitivities at home the genuine EveryDrop EDR2RXD1 is worth the extra spend. It is the only option certified to reduce all 24 contaminants including lead, cysts, and pharmaceuticals.

Frequently Asked Questions

Is the EDR2RXD1 the same as Filter 2?

Yes — Filter 2 is the label name and EDR2RXD1 is the part number, same product.

What does EDR2RXD1 replace?

It is the direct replacement for the older W10413645A — same fit, improved filtration.

Is the EDR2RXD1 compatible with KitchenAid refrigerators?

Yes — it is the primary filter for most KitchenAid French door fridges, also sold as P9WB2L.

What is the difference between EDR2RXD1 and EDR2RXD1B?

The B suffix is a minor revision — both fit the same fridges and perform identically.

Can I use an EDR1RXD1 instead of EDR2RXD1?

No — they fit different housings and are not interchangeable.

How do I reset the filter light after installing the EDR2RXD1?

Hold the filter reset button for 3 seconds until the indicator turns green or blue.

Does the EDR2RXD1 filter ice as well as drinking water?

Yes — it filters water going to both the dispenser and the ice maker.

How long does the EDR2RXD1 last?

6 months or 200 gallons ,whichever comes first.

Is there a good EDR2RXD1 alternative?

Waterdrop is a reputable compatible option, but covers fewer contaminants than the genuine EDR2RXD1.

Do I need to flush the new EDR2RXD1 after installing it?

Yes  run 2-3 gallons through the dispenser and discard before drinking.

Ready to Order the EDR2RXD1?

The everydrop filter 2 replacement is available at UnifiedFilter.com genuine OEM, in stock, with fast shipping across the USA. Single filters and 3-packs available.

Always verify compatibility with your specific fridge model before ordering. Check the label on your current installed filter or your owner’s manual.