
EveryDrop Water Filter 1 (EDR1RXD1) | What It Fits, How It Works & Where to Buy
The EveryDrop Water Filter 1 (EDR1RXD1) is a genuine EveryDrop refrigerator water filter made by Whirlpool that directly replaces the older W10295370A. It fits select Whirlpool, KitchenAid, Maytag, Amana, Jenn-Air, and Kenmore side-by-side and French door refrigerators with an interior twist-in housing.
It is NSF certified to reduce 24 contaminants including lead, mercury, chlorine, cysts, and pharmaceuticals. You should replace it every 6 months or 200 gallons.
If your fridge filter light just turned red or your water is starting to taste off it is time to replace your EveryDrop water filter 1. This guide covers everything, what the EDR1RXD1 is, which refrigerators it fits, what it filters out, how to install it, and whether the genuine OEM is worth it over a generic alternative.
What Is the EveryDrop Water Filter 1?

The EveryDrop refrigerator water filter part number EDR1RXD1, officially labeled Filter 1 is the OEM filter made by Whirlpool Corporation under its EveryDrop brand. It replaced the older W10295370A part number and fits all the same refrigerators, delivering significantly better filtration.
When Whirlpool launched the EveryDrop line, it upgraded certified contaminant reduction from 7 (on the old W10295370A) to 24 on the EDR1RXD1. Same twist-in design. Much better performance.
The filter uses activated carbon block technology as water passes through, the carbon traps impurities through adsorption, leaving you with cleaner water and clearer ice without removing beneficial minerals.
Which Refrigerators Are Compatible With the EDR1RXD1?
The EDR1RXD1 is not a universal filter. It is designed for side-by-side and French door refrigerators with an interior push-button or twist-in filter housing, made by Whirlpool.
Compatible part numbers :
EDR1RXD1, EDR1RXD1B, W10295370A, W10295370, WHR1RXD1, KAD1RXD1, P4RFWB, P8RFWB2L, W10217316, W10276924, W10291030, RFCC3700A, WF537, 46-9081, 46-9930, 9081, 9930
Sample compatible refrigerator model numbers:
| Brand | Compatible Model Numbers |
| Whirlpool / Amana | GSC25C4EYB00, GSC25C4EYB01, GSC25C4EYB02, GSC25C4EYW00, GSC25C4EYW01, GSC25C4EYW02, GSC25C4EYY00, GSC25C4EYY01, GSC25C4EYY02 |
| Whirlpool | GSC25C5EYB00, GSC25C5EYB01, GSC25C5EYB02, GSC25C5EYW00, GSC25C5EYW01, GSC25C5EYW02, GSC25C5EYY00, GSC25C5EYY01 |
| Whirlpool | GSC25C6EYB00, GSC25C6EYB01, GSC25C6EYW00, GSC25C6EYW01, GSC25C6EYY00, GSC25C6EYY01 |
| Whirlpool | GSF26C4EXB00, GSF26C4EXB02, GSF26C4EXA00, GSF26C4EXA02, GSF26C4EXS00, GSF26C4EXS02, GSF26C4EXS03 |
| Amana | ASI2275FRW00 |
| Kenmore | 46-9081, 46-9930 |
To confirm whether it suits you or not check the filter currently in your fridge. If it reads Filter 1, W10295370A, or EDR1RXD1, this is your replacement.
What Contaminants Does the EDR1RXD1 Remove?
The EveryDrop filter 1 is NSF certified to reduce 24 contaminants up from just 7 on the older W10295370A model it replaced.
| Category | Contaminants Reduced |
| Heavy metals | Lead, mercury, asbestos |
| Chlorine | Taste and odor |
| Cysts & parasites | Cryptosporidium, Giardia |
| Pesticides & herbicides | Multiple compounds |
| Industrial chemicals | MTBE, PERC |
| Pharmaceuticals | Atenolol, carbamazepine, and others |
| Emerging contaminants | Bisphenol A (BPA), estrone |
| Sediment | Turbidity (cloudiness) |
Simply it removes the stuff that makes tap water smell, taste off, or raise health concerns while keeping beneficial minerals in your water.
How to Replace Your EveryDrop Filter 1 (Step-by-Step)

Replacement takes about 2-3 minutes. No tools needed.

First Find Your ID

Step 1 – Locate the filter housing : On most compatible fridges, the filter is in the upper-right corner inside the fresh food compartment, sometimes behind a small door panel.

Step 2 – Open the filter door : Press the release button or open the cover. This pushes the old filter out slightly.

Step 3 – Remove the old filter : Pull straight out or twist counterclockwise depending on your model. Keep a cloth nearby a few drops of water may drip.

Step 4 – Install the new EDR1RXD1 : Remove the cap from your new filter. Insert with the arrow pointing up, push firmly, and twist clockwise until it clicks into place.

Step 5 – Reset the filter indicator light : Hold the filter reset button on your control panel for 3 seconds until the light returns to green or blue.

Step 6 – Flush the filter : Run 2-3 gallons of water through the dispenser and discard it. This clears air pockets and any loose carbon from the new cartridge.

How Often Should You Replace It?
Replace the EveryDrop water filter 1 every 6 months or 200 gallons whichever comes first.
Replace sooner if you notice any of these signs:
- Water flow from the dispenser is noticeably slower
- Water or ice has an off taste or smell
- The filter indicator light is red or orange
- Your household uses the dispenser heavily
An overdue filter does not just underperform. It can become a source of contamination itself, releasing trapped particles back into your water over time.
EveryDrop EDR1RXD1 vs Generic Filters — Which Should You Buy?
You will find plenty of third-party alternatives for the EDR1RXD1 — brands like Waterdrop offer compatible versions at a lower price point. Here is an honest comparison to help you decide.
| Feature | EveryDrop EDR1RXD1 (OEM) | Generic / Compatible (e.g. Waterdrop) |
| NSF certified contaminants | 24 | Typically 2-7 (NSF 42/53 only) |
| Compatibility guarantee | Yes – designed for your fridge | Varies by brand |
| Whirlpool warranty protection | Yes | May void appliance warranty |
| Price | Higher | 40-70% less |
| Quality consistency | Consistent (OEM standard) | Varies significantly by brand |
| Risk of fit issues | Very low | Low to moderate |
A reputable NSF-certified third-party filter like Waterdrop handles the basics at a lower price. But if you want the exact performance EveryDrop engineered for your fridge with zero compatibility risk and full Whirlpool warranty protection the genuine EveryDrop refrigerator water filter is the right call.
Frequently Asked Questions
Is the EDR1RXD1 the same as Filter 1?
Yes. The EveryDrop water filter 1 and EDR1RXD1 are the same product. Filter 1 is the simplified label name (the purple circle with a “1”), and EDR1RXD1 is the full part number.
How do I know if my fridge uses Filter 1?
Check the filter currently in your fridge. If it reads Filter 1, W10295370A, or EDR1RXD1, this is your replacement. You can also check your owner’s manual or look up your fridge model number online.
Can I use a generic filter instead of the genuine EveryDrop?
Yes, if it is NSF-certified and confirmed compatible. Note that using a non-genuine filter instead of the genuine EveryDrop may void certain warranty coverage on your refrigerator.
How long does the EveryDrop Filter 1 last?
Up to 6 months or 200 gallons, whichever comes first.
Can the EveryDrop EDR1RXD1 remove lead from water?
Yes. The EveryDrop EDR1RXD1 is NSF certified to reduce lead along with other contaminants like mercury, chlorine, cysts, and certain pharmaceuticals.
Do I need to flush the new filter after installing it?
Yes. Run 2-3 gallons of water through the dispenser and discard it before drinking. This clears air pockets and loose carbon from the new cartridge.
Does the EDR1RXD1 fit French door refrigerators?
Yes it fits select French door and side-by-side models from Whirlpool, KitchenAid, Maytag, Amana, Jenn-Air, and Kenmore. Always verify with your specific model number before ordering.
Is Waterdrop a good alternative to the EveryDrop EDR1RXD1?
Waterdrop makes a popular compatible replacement for the EDR1RXD1 that is NSF 42 and 53 certified. It costs less than the genuine EveryDrop filter but may not reduce all 24 certified contaminants.
Ready to Order?
The EveryDrop water filter 1 (EDR1RXD1) fits hundreds of Whirlpool-family refrigerators, delivers NSF-certified filtration across 24 contaminants, and installs in under 3 minutes with no tools.
Get the EveryDrop EDR1RXD1 at UnifiedFilter.com — Fast Shipping, Genuine OEM