Samsung Side-by-Side Water Filter | RS27T, RS28A, RF28R & RF29 Complete Guide 

Samsung side by side water filter replacement is simple once you know which filter your refrigerator uses. If your Samsung fridge model starts with RS27T, RS28A, RF28R, RF28T, or RF29, the correct filter is the HAF-QIN (DA97-17376B). This guide explains everything you need to know about your samsung side by side water filter, including compatible models, filter location, replacement instructions, and reset steps.

If you own a Samsung side-by-side water filter fridge, RS27T5200SR, RS28A5F1CSR, RF28R7201SR, RF29BB8600QL, or a close variant , you landed in the right place. Every single one of these models uses the same filter.

That filter is the Samsung HAF-QIN (DA97-17376B). There is no unique filter for any of these models. Find yours in the table below, confirm the part number, and order.

Samsung Side-by-Side Water Filter by Model Number

One of the biggest advantages of the Samsung side by side water filter system is that Samsung uses the same HAF-QIN filter across dozens of refrigerator models, making replacement and reordering much easier.

Why Do All These Samsung Models Use the Same Filter?

Samsung standardized their internal filter housing across most of their 2017-onward lineup. French door, side-by-side, 4-Door Flex, if it has an internal square filter slot, it takes the HAF-QIN.

This is actually useful. It means if you have two Samsung fridges at home or if you upgrade your fridge then there is a good chance the same filter works in both. And buying a 3-pack makes even more sense when you know you will be reordering the same part for years.

Where Is the Water Filter on These Samsung Models?

On RS27T and RS28A side-by-side models,  open the fridge door and look at the upper-right interior. You will see a square filter housing with a small eject button or tab. That is it.

On RF28R, RF28T, and RF29 French door models,  open the left door of the fridge section. The filter is in the upper-right or upper-center area, behind a small panel. Some models have a push-button eject, others have a pull tab.

If you cannot find it in either of those spots, check your owner’s manual. A small number of models have the filter in the base grille at the bottom front instead.

How to Replace the Filter

The full step-by-step installation guide is in our Samsung HAF-QIN Filter Guide. Here is the short version:

• Press the eject button or pull the tab to release the old filter
• Pull it straight out,  have a cloth ready for drips
• Remove the cap from the new DA97-17376B and push it straight in until it clicks
• Hold Ice Type + Child Lock for 3 seconds to reset the indicator
• Flush 2-3 gallons through the dispenser before drinking

Total time: under 3 minutes. Replace every 6 months or 300 gallons.

Frequently Asked Questions

What water filter does a Samsung side-by-side refrigerator use?

All Samsung side-by-side models including RS27T, RS28A, RF28R, and RF29 use the HAF-QIN (DA97-17376B).

Is DA97-17376B the right filter for RF28R7201SR?

Yes, all RF28R series Samsung refrigerators use the HAF-QIN (DA97-17376B).

Where is the water filter on a Samsung RS27T5200SR?

Inside the fridge in the upper-right interior area, press the eject button to release it.

How often should I replace the filter on my Samsung RS27T or RS28A?

Every 6 months or 300 gallons, whichever comes first.

Can I use the same filter for multiple Samsung fridge models?

Yes, all models listed on this page use the same DA97-17376B filter. One part number, many compatible models.