The Frigidaire EPTWFU01 water filter catches millions of buyers off guard every year — they search for ULTRAWF replacements and end up with the wrong filter in hand. If your refrigerator was manufactured after 2016, there is a strong chance it no longer uses the ULTRAWF. It uses the EPTWFU01, also known as the PureSource Ultra II. These two filters look almost identical on the shelf, but they are built differently and are not interchangeable.
This guide is built around one goal, making sure you order the right filter the first time. You will learn exactly what sets the EPTWFU01 apart, which refrigerators it fits, how to install it correctly, and the most common mistakes buyers make when searching for this filter online.
EPTWFU01 vs ULTRAWF | Why These Two Filters Are Always Confused

The ULTRAWF and EPTWFU01 are both Frigidaire PureSource filters. They carry the same certifications, offer the same filtration performance, and even look similar. But one critical difference separates them, the installation mechanism.
| Feature | EPTWFU01 (PureSource Ultra II) | ULTRAWF (PureSource Ultra) |
| Product Line | PureSource Ultra II | PureSource Ultra |
| Installation Type | Push-in | Twist-on |
| NSF Certifications | NSF 42 + NSF 53 | NSF 42 + NSF 53 |
| Fits | Newer Frigidaire (2016+) | Older Frigidaire models |
| Filter Life | 6 months / 200 gallons | 6 months / 200 gallons |
| Interchangeable? | No | No |
If you try to install a twist-on ULTRAWF into a push-in housing, the filter will not seat correctly. This can cause leaks or allow unfiltered water to bypass the filter entirely. Always check your filter compartment label before ordering.
What Is the Frigidaire EPTWFU01 Water Filter?
The Frigidaire EPTWFU01 is the second generation of Frigidaire’s PureSource Ultra filtration line. It is a genuine OEM (Original Equipment Manufacturer) replacement filter certified to NSF/ANSI 42 and NSF/ANSI 53 standards. That means it has been independently tested to reduce both taste-and-odor impurities and serious health-related contaminants.
As part of the Electrolux family, the EPTWFU01 is also compatible with select Electrolux refrigerator models that use the same push-in filter housing system.
| Spec | Detail |
| Model Number | EPTWFU01 |
| Also Known As | PureSource Ultra II |
| Generation | Second generation PureSource Ultra |
| Certifications | NSF/ANSI 42, NSF/ANSI 53 |
| Filter Technology | Activated Carbon Block |
| Installation Type | Push-in (no twist required) |
| Filter Life | 6 months or 200 gallons |
| Compatible Brands | Frigidaire, Electrolux |
What Contaminants Does the EPTWFU01 Remove?
The EPTWFU01 uses activated carbon block technology to reduce contaminants before water reaches your dispenser or ice maker. Its NSF 53 certification goes beyond basic taste-and-odor filtering to address health-relevant pollutants.
| Contaminant | Certification Standard | Reduction Level |
| Chlorine taste & odor | NSF/ANSI 42 | High |
| Lead | NSF/ANSI 53 | Up to 99% |
| Cysts (Giardia, Cryptosporidium) | NSF/ANSI 53 | Up to 99.99% |
| Turbidity | NSF/ANSI 53 | Significant |
| Asbestos | NSF/ANSI 53 | High |
| Mercury | NSF/ANSI 53 | Significant |
| Benzene & Lindane | NSF/ANSI 53 | Significant |
| Sediment & Particulates | NSF/ANSI 42 | High |
The EPTWFU01 does not filter fluoride, nitrates, bacteria, or dissolved minerals. If your household needs broader water treatment, consider a dedicated under-sink reverse osmosis system as a complement.

Which Frigidaire Refrigerators Use the EPTWFU01 Filter?
The EPTWFU01 was introduced alongside Frigidaire’s newer push-in filter housing systems. If your fridge was made in 2016 or later, this is likely your filter. Here are the most common compatible models:
Compatible Refrigerator Models
| Frigidaire Models | Electrolux Models |
| FFHB2750TS | EW28BS85KS |
| FFHB2750TD | EW23BC87SS |
| FFHN2750TS | EI28BS55IS |
| FFSS2615TS | EI28BS65KS |
| FFSS2615TD | EW36SC55GS |
| FGHN2868TF | EI23BC82SS |
| FGHN2868TP | EI26SS55GB |
| FGHB2869TF | EW28BS71IS |
| FGSC2335TD | EI26SS30JS |
| FPHB2899LF | EW23CS85KS |
Three Ways to Confirm Your Filter Model
- Look at the label printed inside your filter compartment, it will show the exact model number required.
- Check the filter currently installed in your fridge, the model number (EPTWFU01) is printed on the filter body.
- Search your refrigerator’s model number on unifiedfilter.com for an instant compatibility match.
Common Buying Mistakes With the EPTWFU01
This filter has one of the highest return rates in the refrigerator filter category, almost always because buyers ordered the wrong model. Here are the mistakes to avoid:
Mistake 1: Ordering the ULTRAWF Instead of the EPTWFU01
The ULTRAWF and EPTWFU01 are often listed side by side online. Because they share the PureSource Ultra name and look similar in photos, many shoppers grab the wrong one. The ULTRAWF uses a twist mechanism. The EPTWFU01 pushes straight in. If the housing in your fridge is push-in, the ULTRAWF will not fit properly.
Mistake 2: Buying a Generic Filter Without NSF 53 Certification
Many third-party EPTWFU01-compatible filters carry only NSF 42 certification, which covers taste and odor but not lead or cysts. If the package does not specifically state NSF 53 certification, that filter is not reducing the contaminants that matter most for your family’s health.
Mistake 3: Not Flushing the New Filter
Skipping the flush step after installation is one of the most common errors. New carbon block filters release harmless carbon particles when first used. Running 2 to 3 gallons through the dispenser clears these particles before they reach your glass. Skipping this step results in cloudy or off-tasting water that has nothing to do with a defective filter.
How to Install the Frigidaire EPTWFU01 Water Filter
The EPTWFU01 uses a push-in installation system, which is slightly different from the twist-on method used by older Frigidaire filters like the ULTRAWF. No tools are needed.
- Locate the Filter Housing: The filter compartment is typically found in the upper right area inside the refrigerator.
- Release the Old Filter: Press the release button or tab next to the filter housing and pull the old filter straight out. Do not twist,it is a push-in system.
- Prepare the New Filter: Remove the protective cap from the new EPTWFU01 before installation.
- Insert the New Filter: Push the new EPTWFU01 straight into the housing firmly until you hear or feel it click into place. Do not twist.
- Flush the System: Dispense 2 to 3 gallons of water through the fridge dispenser to clear air and loose carbon particles. Cloudy water at this stage is completely normal.
- Reset the Filter Light: Press and hold the Filter Reset button for 3 seconds until the indicator light resets.

Push-In vs Twist-On | Why This Matters for Installation
The EPTWFU01 is specifically designed for push-in housings. Applying rotational force when installing this filter can crack the housing or damage the O-ring seal, which leads to leaks. If your previous filter required twisting, you have a different housing and likely need a different filter model.
How Long Does the Frigidaire EPTWFU01 Last?
Replace the EPTWFU01 every 6 months or after 200 gallons of filtered water, whichever comes first. Households with more than four regular users, high-sediment tap water, or heavily used ice makers will typically reach the 200-gallon threshold before the six-month mark.
The average household of four uses approximately 1 gallon of filtered water per day between drinking and ice production. At that rate, 200 gallons lasts roughly 6 to 7 months, which aligns neatly with Frigidaire’s recommendation.
FAQs
Is the EPTWFU01 the same as the PureSource Ultra II?
Yes. EPTWFU01 is the model number and PureSource Ultra II is the product line name. They are the same filter.
Will the EPTWFU01 fit in a refrigerator that currently uses the ULTRAWF?
No. The EPTWFU01 uses a push-in installation and the ULTRAWF uses a twist-on mechanism. They are not interchangeable, even though they carry the same certifications.
Why is my water still cloudy after installing the EPTWFU01?
Cloudiness is caused by harmless air and loose carbon particles in a new filter. Flush 2 to 3 gallons through the dispenser and the water will clear within minutes.
Can I use the EPTWFU01 without fully pushing it into the housing?
No. The filter must click fully into place. A partially installed filter will not seal properly and can allow unfiltered water to pass through or cause leaks.
Where can I buy the genuine Frigidaire EPTWFU01 in the USA?
The genuine Frigidaire EPTWFU01 PureSource Ultra II replacement filter is available at unifiedfilter.com with fast shipping across the USA.
Conclusion
The Frigidaire EPTWFU01 PureSource Ultra II is the correct filter for newer Frigidaire and Electrolux refrigerators with push-in housing systems. If you have been using the ULTRAWF and your last filter change involved a twist, double-check your current filter before reordering. The push-in EPTWFU01 is the upgrade your fridge was designed for and getting the right one the first time saves you the hassle of a return.
